| Prospects for the application of intelligent automation in paper industry | Stanislav Gorobchenko, Dmitriy Kovalev, Sergey Voinash, Ramil Zagidullin,
Ildar Khafizov, Georgy Parfenopulo and Sergey Meshkov
| 2025 | Research Gate |
| Beyond Automation Infusing Human Intelligence into Paper Manufacturing | D K Singhal
| 2025 | www.dksinghal.in |
| A Case Study of AI-Driven Pulp Bleaching: Achieving Significant | Ganesh Bhadti, B V Sivakumar, D. Radhakrishnan | 2025 | IPPTA, Vol.37, No.1 |
| AI Enhanced Ozone Production for More Efficient Bleached Pulp Production | Alexis METAIS | 2025 | IPPTA, Vol.37, No.1 |
| AI-Enhanced Product Quality & Machine Safety | Madhure Desarda, Akhilendra Verma, Payal Govind Borgaonkar | 2025 | IPPTA, Vol.37, No.1 |
| Application of AI-based Approach in Paper Making Process | Anurag Dhiman, Saurabh Kolekar, Shraddha Chaudhary, Shrinivasprasad Ankeyawar | 2025 | IPPTA, Vol.37, No.1 |
| Bleaching Process Chemical Optimization and Control in Chemical Bagasse Pulpmill in TNPL | R. Rajalingam, J. Santhakumar, M. Mahenthran, M.P.N. Balamurugan | 2025 | IPPTA, Vol.37, No.1 |
| Data-Driven decision making in Paper Machines using Virtual Measurements | Katarina Bodor, Abhay Anand, Mahip Goel, Yashwant S.C. | 2025 | IPPTA, Vol.37, No.1 |
| Digitalization in Action: AI/ML Driven Decision Support in Pulp & Paper | Shankar Das, Alexander Orlovsky, Pekka Vänni | 2025 | IPPTA, Vol.37, No.1 |
| Empowering Productivity and Quality in AI Era | Rakesh Uniyal, Matias Hultgren, Aki Alanne, Ramesh Chandra | 2025 | IPPTA, Vol.37, No.1 |
| Enhancing Finished Paper Products Logistics with Artificial Intelligence: Data-Driven Approach | R. Rajalingam, M. Dhandapani, V. B. Pravin Kumar, R.Murugavel Ananth | 2025 | IPPTA, Vol.37, No.1 |
| Enhancing Paper Quality through Artificial Intelligence (AI) | S.Gokulakannan, M. Ashok kumar, R.Bhuvaneswari, R.B.Lakshmipathi Sakthi | 2025 | IPPTA, Vol.37, No.1 |
| Harnessing Artificial Intelligence (AI) in TNPL Paper Conversion Process | R.B.Lakshmipathi Sakthi, S.Kumaran, S.Gokulakannan, K.Sakthivel, A.Senthilvel | 2025 | IPPTA, Vol.37, No.1 |
| Kuantum’s Leap in Paper Industry: Boosting Productivity and Quality with AI | Vishal Chauhan, MN Reddy, Rajan Kaushish | 2025 | IPPTA, Vol.37, No.1 |
| Leveraging BIG-AI for Proactive Sheet Break Prediction in Pulp and Paper Industries | Dr. Sankaraiah Sreeramula, Kannan Pattabiraman | 2025 | IPPTA, Vol.37, No.1 |
| Machine reliability improvement with use of Artificial Intelligence | Anuj Kumar Tayal, N. K. Singh, Vishal Garg, Ganesh Madival | 2025 | IPPTA, Vol.37, No.1 |
| Next-Level AI based Vision Systems Papertech Vision Solutions | Adolf Wachter | 2025 | IPPTA, Vol.37, No.1 |
| Prediction of real-time stiffness and moisture % in Paper through AI | Akhilesh Kumar, Sunandan Mallick | 2025 | IPPTA, Vol.37, No.1 |
| Revolutionizing Pulp and Paper Industry through Artificial Intelligence for Enhanced Paper Quality | Shanthababu Pandian, Shanthakumar Pandian | 2025 | IPPTA, Vol.37, No.1 |
| Best Practices Manual in Volume 12 Paper Sector | Confederation of Indian Industry | 2024 | Google |
| Intelligence of equipment and control systems at pulp and paper industry enterprises | Stanislav Gorobchenko, Dmitriy Kovalev, Sergey Voinash, Ramil Zagidullin,
Ildar Khafizov, Taisiya Garbuzova, and Svetlana Alekseeva | 2024 | E3S Web of Conferences |
| International Journal of Research Publication and Reviews | Abdalla Mohamed E Zayid, Ahmed Said Ahmed Ashit, Salim Omer Aljladi | 2024 | International Journal of Research Publication and Reviews, |
| R1 Paper-based electronics: Towards sustainable electronics | Sonia Gomez-Gijon, Inmaculada Ortiz-Gómez, and Almudena Rivadeneyra Torres | 2024 | Research Gate |
Automation and Electronic
Sensors in Seshasayee Paper
and Boards Ltd, Unit: Erode | S. Sivakumar & S. Santhosh Kumar, B. V. Sivakumar, C.
Thirumalaisamy & D. Radhakrinhnan | 2024 | IPPTA, Vol.36, No.2 |
Elevating Paper Quality and Production
Efficiency with Enhanced Machine Direction Controls | Juuso Palonki | 2024 | IPPTA, Vol.36, No.2 |
Enhancing Efficiency through
Electricals, Electronics, Automation and Digital Technology | Naresh Madan, Suresh Babu, Naveen Wadhwa & Anshuman Parashar | 2024 | IPPTA, Vol.36, No.2 |
Enhancing Energy Effciency and
Performance Through
Electrical Systems In SPB | V. Udhayasree, S.S. Nandha kumar, R. I. Ambalavanan, S. Suresh kumar, & T. Aishwarya | 2024 | IPPTA, Vol.36, No.2 |
| Enhancing Process and Operations Through Digitalization: A Blueprint for Utilizing Advanced Data Analytics, Model Predictive Control and Remote Monitoring | Shankar Das, Mark Korby | 2024 | IPPTA, Vol.36, No.2 |
| Enhancing Shop Floor Safety through Industry 4.0 Technologies | M Sravani | 2024 | IPPTA, Vol.36, No.2 |
Fiber Analysis and Freeness online
Measurements help Recycled Paper Mill Achieve Uniform Product Quality
and Eliminate Overrefining | Manoj Sukumaran, Håkan R. Osterholm | 2024 | IPPTA, Vol.36, No.2 |
Fiber Analysis and Freeness online
Measurements help Recycled Paper Mill Achieve Uniform Product Quality
and Eliminate Overrefining | B. Saravanan, R. Shunmugam, S. Asokan,R. Ragunathan, R. Rajalingam, M. Suresh, K Sudarshan, Shamim Ahmad | 2024 | IPPTA, Vol.36, No.2 |
Leveraging Data Analysis for
Process Optimization and Process Automation Journey in TNPL | K. Kumaresan, G. Venkataramanan, R. Rajalingam,
Gopalakrishnan & Arunachalam | 2024 | IPPTA, Vol.36, No.2 |
Minimize Sheet Breaks
in Paper Machine using Data Analytics | P Kannan & Dr. Babji, | 2024 | IPPTA, Vol.36, No.2 |
Pulp Viscosity Variation Reduction
through AIML Model | Pavan Kulkarni, Manohar Kumar R. & Panchakshari S.G. | 2024 | IPPTA, Vol.36, No.2 |
Striving for Operational Excellence:
A Holistic Approach through Dynamic Study
& Performance Test | Deepesh Yadav & Ajit Singh | 2024 | IPPTA, Vol.36, No.2 |
Transformative Impact of AI-Integrated
Filtrate Turbidity Testing in Pulp and
Paper Manufacturing | Dr. Claudy D’Costa | 2024 | IPPTA, Vol.36, No.2 |
| Digitization---Challenges & Opportunities For Indain Paper Industry | Arun Kumar Bharti | 2024 | IPPTA, Vol.36, No.2 |
| Improvements in Recovery Boiler for Energy Savings | K Thiruselvam, Nagen Chandra Nayak, P Muthu Kumar, S Karthick, K Mehanathan, P A Jeyanthkarthikeyan, J Niranjan Kumar | 2024 | IPPTA, Vol.36, No.2 |
| Adopting Automation and Digital Technologies for Enhancing Plant Efficiency and Reliability at Kunatum Papers | Adwitiya Gaurav, Parveen Goel | 2024 | IPPTA, Vol.36, No.2 |
| Bearing insulation’ and ‘Winding insulation’ – new technologies for electric motors used with Converter operation | Klaus Buettner, Ashish Shere | 2024 | IPPTA, Vol.36, No.2 |
| Harnessing the Power of Digital Technologies in Paper Board Conversion & Despatch | Saravanak krishnan A S, G.Sanjeevi Kumar, Venkateswaran R, Gopinath N, | 2024 | IPPTA, Vol.36, No.2 |
| Maintain Colour Consistency with Autopilot Automation system from X-Rite for Paper Mills | Felix AK Pinto, Manfred Binder | 2024 | IPPTA, Vol.36, No.2 |
| Digital Insights Deliver Tangible Results in Cooling Water Systems & Tangible Life Safety Features in Recovery Boiler Systems | Mukundan Venkatachari, | 2024 | IPPTA, Vol.36, No.2 |
| Plant’s Dynamic Utility Kpis : Need For Ongoing Improvement, Optimization And Sustenance – Digital Sustenance Service | Dhruval Khamar | 2024 | IPPTA, Vol.36, No.2 |
| Energy Efficient Technologies in Paper sector and their impact on the sectoral Low carbon roadmap | P. V. Kiran Ananth, Dinesh Ghai, Vaibhav Girdhar, Binoy Vijayan | 2024 | IPPTA, Vol.36, No.2 |
| Energy benchmark and energy saving potential in the pulp and paper industry | Tuan Le-Anh | 2023 | http://www.aimspress.com/journal/energy |
| Kraft Mill variability and efficiency benchmarking | Akhlesh Mathur, Adam Melton, Scott Kahre | 2022 | IPPTA, Vol.36, No.2 |
| Artificial Intelligence in Pulp and Paper | Arjunan P N,Vipin Raghavan, TajinderBir Singh Chahal, Samyukta Sankaralingam | 2021 | IPPTA, Vol. 33, No. 3 |
| Automation For Pulp Mixing In Paper Industries | Nirmala devi P, Vigneswaran V, Sowmitha S, Sri Surya M K | 2020 | International Journal of Scientific & Technology Research |
| Implementation and Enhancement of Data Management Sytem Using ERP-Automation in a Pulp and Paper Industry | S.Sharmily, R. Murugavel Ananth | 2020 | IPPTA, Vol. 32, No. 2 |
| Control and Synchronisation of Motors in Paper Mills Using PLC | Amol Shankarrao Rane, Asst.Prof. S.K. Umathe | 2019 | IOSR Journal of Engineering (IOSRJEN) |
| Electric drive control system of the paper-making machine | V P Kazantsev, D A Dadenkov and L V Ponosova | 2019 | Journal of Physics: Conference Series |
| An Industry 4.0 Research Review For The Pulp And Paper Industry | A.Telukdarie, A Kumar | 2018 | Proceedings of the International Conference on Industrial Engineering and Operations Management |
| Paper and Pulp Industry Manufacturing and Treatment Processes -A Review | A. Latha ,M. C. Arivukarasi, C. M. Keerthana, R. Subashri, V.Vishnu Priya | 2018 | Research Gate |
| Automation in papermill finishing house | K. Sivarama Krishnan, K. Sudhakar | 2018 | IPPTA, Vol. 30, N0 3 |
| Automation Solution in Process, Productivity and Quality in Pulp and Paper Industry for Sustainable Paper Making | Barathi G | 2018 | IPPTA, Vol. 30, N0 3 |
| Business Process Automation for Process, Productivity, Quality & Marketing Optimization at TNPL Board Machine Finishing House | S. Nandagopal, V. Thiruppathy, P Prince Tholkappian | 2018 | IPPTA, Vol. 30, N0 3 |
COLLECTION AND INCINERATION OF NON CONDENSABLE
GASES (NCG) THROUGH AUTOMATION | T. Harischandra Prasad, N.V.S. M Krishan | 2018 | IPPTA, Vol. 30, N0 3 |
| Continuous Improvements In Paper Manufacturing Automation at TNPL | R. Rajalingam, R. Murugavel Ananth, K. Kumaresan | 2018 | IPPTA, Vol. 30, N0 3 |
| Improving Papermaking with Integrated Web Monitoring and Web Inspection Camera Systems | Kari Hilden, Cloin Bridge | 2018 | IPPTA, Vol. 30, N0 3 |
| Inception of In-House Automation – A march towards Industry 4.0 | Srikanth Ganala, KBS Krishna, Shaik Junaid | 2018 | IPPTA, Vol. 30, N0 3 |
| Increasing Productivity Through Automation | Suraj Mohapatra | 2018 | IPPTA, Vol. 30, N0 3 |
| Innovative technology “OxiproTM, Paper machine press felt effluent Monitor and 3DT TrasarTM for DAF operation” help on Productivity, Water and Energy conservations through Automation and on-line real time monitoring | V. Padmanabhan, Sundar R, Mohan | 2018 | IPPTA, Vol. 30, N0 3 |
| Optimized Automation and Centralized Mill Data Acquisition for Paper Making | Muralidhar Ekambaram | 2018 | IPPTA, Vol. 30, N0 3 |
| Optivision Centerline - Solution Note | Niranjan Rao | 2018 | IPPTA, Vol. 30, N0 3 |
| Paper Mill Automation For Customer Satisfaction and Profit Maximization - Case Studies of Paper Mills in India | Dr. V. Barla | 2018 | IPPTA, Vol. 30, N0 3 |
| Papermaking 4.0 – The vehicle to the factory of the future | Dr. Matthias W. Schmitt, | 2018 | IPPTA, Vol. 30, N0 3 |
| Automation in pulp and paper industry | P K Suri, Manish Srivastava & Mayank Jindal | 2018 | IPPTA, Vol. 30, No. 1 |
| Advanced digital mill operations | Mikko Jalava | 2018 | IPPTA, Vol. 30, No. 1 |
| paper-machine-automation-using-plc-vfds-and-hmi-IJERTV6IS050331 | Amanpreet Kaur, Er. Pardeep Singh | 2017 | International Journal of Engineering Research & Technology (IJERT |
| Improvement Equipment Reliability & Maintenance Planning Through Predictive Maintenance - A Case Study at Yash Papers Ltd. | Vikram Makin, Narendra Agarwal, Dinesh Jain | 2017 | IPPTA, Vol. 29, No. 1 |
| Performance Improvements And Sustainability Through Advance Process Controls And Remote Monitoring Services | Rakesh Uniyal | 2017 | IPPTA, Vol. 29, No. 1 |
| Removal of Moisture Content in Paper Machine Using Soft Computing Techniques | M. Senthil Kumar, K. Mahadevan | 2016 | Scientific Research Publishing Inc. |
| Application of Dynamic Simulation for The Pulp and Paper Industry | Chandan Kumar | 2016 | IPPTA, Vol. 28, No. 1 |
Automation of Sectional Drive Paper Machine Using PLC and HMI
108 | Banupriya, Smt. R .Radha, Basavaraj V M | 2015 | International Journal of Engineering Research and General Science |
| Total Integrated Automation for Pulp & Paper Industry | Kumar Pradeep | 2015 | IPPTA, Vol. 27, No. 4 |
| Assessing Information Gap in Industrial Performance Analysis for Sustainable Devlopment Insight from case study of Paper Indusrty in India | Debrupa Chakraborty, Shymasree Dasgupta | 2014 | The journal of industrial statistics |
| Optimizing Valve Maintenance Using Condition Analysis | Raty Jarkko | 2014 | IPPTA, Vol. 26, No. 3 |
| A Detailed Current Harmonic Analysis and GA Based Passive LC Filter Design in Six-Pulse Variable Frequency Drive | Maheswaran D., Rajasekar N. & Ashok Kumar L. | 2014 | IPPTA, Vol. 26, No. 2 |
| An Intelligent Tool for Set Point Prediction and Diagnostics for a Paper Machine to Maintain at Its Optimum Performance Achieved | Gadwal Narendra, Gothe Yogesh & Kuvalekar Datta | 2014 | IPPTA, Vol. 26, No. 3 |
| 010_pp 717-726 | K. Madhanamohan, R.K. Praveen, T.R. Nirmalraja,H. Goutham, R. Sabarinathan and A. Logeesan | 2013 | Advance in Electronic and Electric Engineering. |
| New Developments in Online Pulp Quality Measurements | Uniyal Rakesh, Nigel Farrand | 2013 | IPPTA, Vol. 25, No. 1 |
| Advanced Automation System in Packaging Board Plant | Agarwal N.K., Goswami S., Singh Anil, Bhavsar Ranjit, Dode D.D., Srivastava Manish | 2012 | IPPTA, Vol.24, No. 1 |
| FLC and PLC based Process Optimization and Control of Batch Digester in Pulp and Paper Mill | Singh Rana Dinesh | 2012 | Research Journal of Engineering Sciences |
| Metso's New Fiber To Print Solution For Optimum Paper Quality | Uniyal Rakesh, Sorsa Jukka | 2012 | IPPTA, Vol.24, No. 1 |
| Straight Talk About Harmonic Problems and Case Study for Using AC Drives in Pulp and Paper Industries | Maheswaran D. | 2012 | IPPTA, Vol.24, No. 2 |
| Soft Computing Based PID Controller Design for Consistency Control in Papermaking | Nagaraj B. & Vijayakumar P. | 2012 | IPPTA, IVol.24, No. 2 |
| Optimizing Consistency Management in RCF Processes | Uniyal Rakesh | 2012 | IPPTA, Vol.23, No. 1 |
| Optimum Tuning Algorithms for PID Controller A Soft Computing Approach | Nagaraj B., Muthusamy P., Murali B., Shahulhammed M., Murugananth N. | 2010 | IPPTA, Vol.22, No. 2 |
| Modern Automation Technologies in Stock Preparation & Wet End | Uniyal Rakesh, Tripathi Pravin, Pavlovick Bogdan, Peltomaki Teuvo | 2009 | IPPTA, Vol.21, No. 1 |
| A Review of Recent Advances in the Use of Thermography in Pulp and Paper Industry | Verma Anuj Kumar, Ray A.K., Singh S.P., Banerjee D. and Schabel Samuel | 2009 | IPPTA, Vol.21, No. 2 |
| On-Line Porosity Analyzer for Optimization of Paper and Board Production Processes | Komulainen Pekka, Mustalahti Heilkki, Karinen Kai | 2009 | IPPTA, Vol.21,, No. 3
|
| Optimising Process Control for higher productivity in Fiberline Operations at ITC-PSPD, Unit: Bhadrachalam | Keshav Dutt Sharma, Ranjit Kumar K. | 2008 | IPPTA, Vol.20, N0. 1 |
| On Line Measurement and Control System for Stock-Flow & Consistency on the Paper Machine | Rajiv Goel, Arvind Kumar Jindal & Amit Kumar Gupta | 2007 | IPPTA, Vol.19, N0. 1 |
| Technological Advancement of Fiber Line in Indian Paper Mills | Dr. S. Raghuveer | 2007 | IPPTA, Vol.19, N0. 1 |
| Effect of Metal Ions on Electrical Insulation Paper Properties | Vikram Singh, Dharm Dutt, Swarnima and Dinesh Tahiliyani | 2007 | IPPTA, Vol.19, N0. 2 |
| Studies of Kinetics and Electrical Properties of Cellulose Fiber by Cynoethylation | V.S. Patil and J. D. Dhake | 2006 | IPPTA, Vol. 18, No. 1 |
| Field Transmission Protocols for Process Industry - an analytical and comparative study | S. C. Sharma and Pawan Singh Rajawat | 2006 | IPPTA, Vol. 18, No. 2 |
| Controller Tuning of Pilot Plant Heat Exchanger in Pulp Mill using Computer Simulation Techniques | P. K. Bhaba, K. Vaithiyanathan, T. Karunanithi and S. Abraham Lincon | 2005 | IPPTA Vol. 17, No. 1 |
| Some Studies on Dyes for Coloration of Paper | S. Kamel, Y. A. Youssef and S. Shakra | 2005 | IPPTA Vol. 17, No. 1 |
| Transformer Oil Analysis: An Overview | Parveen Goyal, A.K. Chatterjee and Narender Sharma | 2005 | IPPTA Vol. 17, No. 1 |
| Estimation of Energy Gains through Modelling and Simulation of Multiple Effect Evaporator System in a Paper Mill | A.K.Ray, N.K.Sharma and Pitam Singh | 2004 | IPPTA Vol. 16, No. 2 |
| Electrophotography : Effects of Printer Parameters on Fusing Quality | Laurence Leroy, Veronique Morin and Alessandro Gandini | 2003 | IPPTA Convention Issue |
| Distributed Control System and its Future Scope | S.C. Sharma and Sanjeev Gupta | 2003 | IPPTA Vol. 15, No. 2 |
| Parta - A Performance Monitoring Tool | K.M. Banthia | 2003 | IPPTA Vol. 15, No. 2 |
| Progressing Towards Proactive Maintenance | K. Thangaraju, A. Balakumar, S. Nandagopal and B. Mahesh | 2003 | IPPTA Vol. 15, No. 3 |
| Total Productive Maintenance : The Zero-Based Approach to Enhance Plant Efficiency - A Case Study | D.P. Chandarana and R.K. Sharma | 2003 | IPPTA Vol. 15, No. 3 |
| Maintenance Improvements in Continuous Digester for Bagasse Pulping | V. Nagarajan, R. Balasubramaniam, S. Govind and K.S. Kasi Viswanathan | 2003 | IPPTA Vol. 15, No. 3 |
| Effective Electrical Maintenance and Trouble Free Operation in Pulp and Paper Mills | M. Ekambaram | 2003 | IPPTA Vol. 15, No. 3 |
| Maintenance of Centrifugal Pumps | M. Maria Francis | 2003 | IPPTA Vol. 15, No. 3 |
| Application of Drives and Automation In Pulp and Paper Mill | S. Jayakumar and Rajshekhar | 2003 | IPPTA Vol. 15, No. 3 |
| Customised Approach to Electrical Maintenance - Our Experience | Rajiv Kandwal, S.S. Nandha Kumar and P.V. Ramanan | 2003 | IPPTA Vol. 15, No. 3 |
| Strategy to Achieve Zero Breakdown Through TPM | T. Vidyasagar and Vijay Mantri | 2003 | IPPTA Vol. 15, No. 3 |
| Condition Monitortng of Antifriction Bearing Using Shock Pulse Method | V. Vijayanand | 2003 | IPPTA Vol. 15, No. 3 |
| Power Management in Paper Industry on Pulp Pump | K.L. Narayanan, A. Madhavan and Mahesh Kumar | 2003 | IPPTA Vol. 15, No. 4 |
| Low Voltage Distribution System Improving Its Efficiency | Anand J. Kurien | 2003 | IPPTA Vol. 15, No. 4 |
| Cross Direction Profile Unstability: Evaluation and Correction | D.K. Singhal | 2002 | IPPTA Vol. 14, No. 1 |
| Latest Trends in On-line Paper Web Inspection with Imaging Capabilities | Gandhi Sameer | 2001 | IPPTA Convention Issue |
| Computer Applications in Paper Industry | Janbade Vipul and Gupta H.K. | 2001 | IPPTA Vol. 13, No. 1 |
| Investigation of Error in Measurement of Diesel Consumption for- Continuously Running DG Sets | Singhal D.K. | 2001 | IPPTA Vol. 13, No. 4 |
| Optimization of Electrical Load Distribution in Small Paper Mills Based on DG Sets | Singhal D.K., Chauhan D.K., Malik B.R. | 2000 | IPPTA Vol. 12, No. 1 |
| Mathematical Modeling of Pulper Operation | Singhal D. K | 1999 | IPPTA Convention Issue |
| Rewinder Trim Loss Minimization Using Microsoft Excel Spreadsheets | Singhal D.K. | 1999 | IPPTA Vol. 11, No. 4 |
| Shreyans Doubled Its Capacity by Modification And Installing Process Automation System in A Paper Machine | Bansal A.K., Bhargava K.S., Sharma S.K. & Anil Kumar | 1995 | IPPTA , Vol. 7, No. 1 |
| Paper Quality Requirements For Printing VIS-A-VIS Developments in Paper MakingAPC Based Brightness, colour and tensile Strength Measuring Syeterm | Rudrayya G., Sarma G.S.R.P., Murthy N.V.S.R., Sarkar P.K. | 1995 | IPPTA , Vol. 7, No. 2 |
| APC Based Brightness, colour and tensile Strength Measuring Syeterm | Sankaranarayanan F.E., Govindaraj R. and Gopal A. | 1995 | IPPTA , Vol. 7, No. 2 |
| Improving Paper Quality through online measurement and control fiber orientation and its impact on printing | Syre R. Hans, Hagen werner | 1995 | IPPTA , Vol. 7, No. 2 |
| SIMUlATION AND DEVELOPMENT OF LEAST COST BLENDS | Rao N.J., Chatterjee A., Saxena A. | 1989 | IPPTA Silver Jubilee |
| lndigenous Development of Electronic Systems For Improving Paper Productivity | P.E. SANKARANARAYANAN | 1987 | IPPTA, Vol. 24, No. 4 |
| Application of Computer Based Control System In Paper Machine to Improve Quality and Productivity | SUBRAMANI S.R., SENNIAPPAN K.M. | 1987 | IPPTA, Vol. 24, No. 4 |
| On-Line Brightness Sensor and Chemical Analyzer For Bleaching Automation | HATALA RAIMO | 1987 | IPPTA, Vol. 24, No. 4 |
| Application of Electronic Control System in Finishing House At Tamil Nadu Newsprint and Papers Limited | SENNIAPPAN K.M. & SUBRAMANI S.R. | 1987 | IPPTA, Vol. 24, No. 4 |
| Improved Process Control Strategy for Liquid Phase Kraft Pulping of Bamboo (D. Strictus) | Goyal Dr. Pravin | 1987 | IPPTA, Vol. 24, No. 4 |
| Multivariable Interactive logic Control System For Batch Digester | BHATJIWALE A.S., RAO N.J. | 1987 | IPPTA, Vol. 24, No. 4 |
| Need of Installation of Appropriate Control Systems For Improving Productivity in Pulp Mill | Gopichand K., Suri P.K. and Subhesh Maheshwari | 1987 | IPPTA, Vol. 24, No. 4 |
| Instrumental and Chemical Process Control in Bleaching of Pulp | KULKARNI A. Y. | 1987 | IPPTA, Vol. 24, No. 4 |
| Computer Process Control in Modern Pulp and Paper Industry | Tiwari A.K., Rao N.J. and Bhatjiwale A.S. | 1987 | IPPTA, Vol. 24, No. 4 |
| Integrated Control System at West Coast | H.G. Kulkarni, R. Parthasarthy, B.T. Mishal, G.D. Maheshwari | 1984 | IPPTA Convention Issue |
| Indigenous Capability for Electronic Process Control in Pulp and Paper Industry | Yogesh Puri, S.L. Keswani | 1984 | IPPTA Convention Issue |
| Role of Instrumentation in efficient operation of paper plants part I for small paper mills | N.J. Rao, A.K. Ray, M.C. Bansal | 1984 | IPPTA, Vol.21, No. 1 |
| Problems of small paper units : consulting engineers view point | Surajit Ray, B.M. Gupta | 1983 | IPPTA, Vol.20, No. 4 |
| Validation of and Deviation in Lin Et Al's Kappa Prediction Equation As Verified For E.Tereticornis, E.Grandis and D. Strictus | G.V.Shankar, N. Raju, P.Subramaniam, V.R.Parthasarthy | 1982 | IPPTA, Vol. 19, No. 3 |
| A Computerized Approach For Pulp and Paper Industries Development | J.S.Negi, T.K.T.S.Ramanujacharyulu | 1981 | IPPTA, Vol. 18, No. 3 |
| Process Control Computers in Pulp and Paper Industries | H.R. Mohan | 1978 | IPPTA, Vol. 15, No. 1 |
| The H factor for Bamboo Sulphate Pulping : A device to control pulp Mill Operation | S.V. Singh, S.R.D. Guha | 1976 | IPPTA, Vol. 13, No. 1 |
| Electricals For Mini Paper Plants | N. S. R. Murthy, R. S. Mani | 1975 | IPPTA, Vol. 12, No. 2 |
| Thyristor Controlled Variable Speed DC Motor Drive Systems | R.S. Mani | 1974 | IPPTA, Vol. 11, No. 4 |
| Design and Manufacture of Electrical Equipment By HEL Factory for Paper Industry | B. R. Sule, B. S. N. Rao | 1972 | IPPTA, Vol. 9, International Seminar |
| Process Computer Interface | S. K. MUKERJEE and B. TIBURTIUS | 1970 | IPPTA, Vol. 7 No. 4 |
| Our efforts towards self-reliance for spares | SRI J. C. JAIN, SRI J. P. SINGH | 1967 | IPPTA, Vol. 4 No.1 |
| Selfsufficie.ncy in thesupp.ly of electrical drives for paper industry | J. MUKHERJEE AND R: R. SULE | 1967 | IPPTA, Vol. 4 No. 2 |
| E6-43-34-05 | H. N. Koivo | | Control Systems, Robotics, and Automation |
