| Pulping of Different Raw Materials (Wood and Agro-Waste) | Dr. Shuank Malik | 2025 | IPPTA, Vol.37, No.2 |
| Advances in High Yield Pulping Processes | M. B. Jauhari | 1990 | 3rd Forest Product conference |
| Dissolving_grade pulp a sustainable source for fiber | Elisabet Quintana· Cristina Valls · M. Blanca Roncero | 2024 | |
| Razia Sultana Popy, M. Mostafizur Rahman, M. Sarwar Jahan | Razia Sultana Popy, M. Mostafizur Rahman, M. Sarwar Jahan | 2024 | IPPTA, Vol.36, No.1 |
| Different Type of Paper Pulping and Process of Green Bleaching | Sushil Nagar, Kajal Kumari, Sakshi Goyal, Sonu, Neeraj Kharor | 2022 | Chemical Science Review and Letters |
| A review of the traditional pulping methods and the recent improvements in the pulping processes | Drake Mboowa | 2020 | Springer |
| Pulp and paper industry: An overview on pulping technologies, factors, and challenges | K F Rullifank, M E Roefinal, M Kostanti, L Sartika and Evelyn | 2019 | Research Gate |
| Investigation the Flow Behavior of Continuous Pulping Digester Using RadioTracer Technique to Optimize the Operating Conditions | Meenakshi Sheoran, Avinash Chandra, Haripada Bhunia, Pramod K. Bajpai, Harish J. Pant & S. Madhukar Rao | 2016 | IPPTA, Vol. 28, No. 3 |
| Acetic Acid Pulping and ECF Bleaching of Rice Straw and Effect of Acid Concentration on Pulp Characteristics | Sinha Akhouri Sanjay Kumar, Singh Manohar & Singh Surendra Pal | 2012 | IPPTA, Vol.24, No. 2 |
| Formic Acid/Acetic Acid Pulpig of Kash (Saccharum Spontaneum), Jute (Chorcorus Capsularies) and Dhaincha (Sesbania Aculeata) | M. Sarwar Jahan, D.A. Nasima Chowdhury and M. Khalidul Islam | 2007 | IPPTA, Vol.19, N0. 2 |
| NS-AQ Pulping of Kash (Saccharum spontaneum) | M. Sarwar Jahan, D. A. Nasima Chowdhury and M. Khalidul lslam | 2006 | IPPTA, Vol. 18, No. 1 |
| Energy Conservation Approaches in Digester House | S. Suresh Khanna, Ram Kumar, N. J. Rao and Kanna Babu | 2005 | IPPTA - Convention Issue |
| Characterization of the Acidified Liquors from Bamboo (Bambusa procera acher) Black Liquors | Thi Hong Man Vu, Raimo Alen and Hannu Pakkanen | 2005 | IPPTA Vol. 17, No. 1 |
| Evaluation of pulping by propylene glycol | Zenat, A. N. and Enas, A. H. | 2005 | IPPTA Vol. 17, No. 1 |
| Optimization of a Pulping Model through Application of Taguchi Techniques to evaluate Pulp | Aseem Sharma, H.C. Joshi, C.S. Upadhyay, D. K. Mishra and S. Chowdhary | 2005 | IPPTA Vol. 17, No. 2 |
| Application of Digester Cooking Additives in Pulping | Arvind Kumar Sharma, Anurag Sharma and M.G Panth | 2004 | IPPTA Vol. 16, No. 3 |
| Feedstock Grade Transition iii a Continuous Pulp Digester using Model Based Management of Kappa Profile | Sharad Bhaffiya | 2004 | IPPTA Vol. 16, No. 4 |
| Fiber Recovery from Waste Paper: A Breakthrough in Re-Pulping Technology | Jerry Aue,Keith Picard, Kevin Grabner | 2003 | Volume 1 - Industrial Energy Efficiency and Sustainability |
| Lignin from Agro Residues during Pulping and Bleaching : A Review | P. Marimuthu and G. Venkoba Rao | 2003 | IPPTA Vol. 15, No. 2 |
| Batch Digester Optimisation and Control System- An Indigenous Approach | Prasad Gandikota, B. Sundaresan, S. Uma, S. Chandrasekar and P. Sudhakara Rao | 2002 | IPPTA Convention Issue |
| Innovative Approaches In Pulping of Lignocelluloses - A Review | Mohamed EI-Sakhawy | 2002 | IPPTA Vol. 14, No. 1 |
| Use of Biological Agents for Pulping and Bleaching in Pulp and Paper Industry | M. Sapre, H. Jha, M.B. Patil and J.D. Dhake | 2002 | IPPTA Vol. 14, No. 4 |
| Technological Changes in Non-Wood Pulping Focusing on Emissions, Quality and Operating Costs | Boman Rolf & Jain N.K. | 2000 | IPPTA Vol. 12, No. 1 |
| Indo-Dutch Project on Cleaner Production Technologies in Large Integrated Pulp and Paper Mills - An Over View | Venkoba Rao G | 2000 | IPPTA Vol. 12, No. 1 |
| Fourier Transform Intrared Studies on Lignin From Cassia Siamea and Ailanthus Excelsa | Prakash T. Kosaukar and Ingle V.N. | 2000 | IPPTA Vol. 12, No. 3 |
| Urea Pulping of Wheat Straw : A Green, Clean, and Environmental Friendly Process | Gupta H.K., Sivhare Priti, Tripathi Saudeep aud Jaiu Rajeev | 2000 | IPPTA Vol. 12, No. 4 |
| Isolation And Ultraviolet Ionisation Spectra of Alkali Lignin and Organosolv Lignin From Cassia Siamea | Koshankar Prakash T. and Ingle V. N. | 1999 | IPPTA Vol. 11, No. 2 |
| Chemical Additives for Accelerating Delignification | Naithani Sanjay and Singh S. V. | 1999 | IPPTA Vol. 11, No. 3 |
| Nepa Limited: Turning To Greenfield Mill In Present Scenario of Globalisation | Sharma S.C., Purandare J.S., Patel N.R. & Jadhav S.C. | 1999 | IPPTA Vol. 11, No. 4 |
| Indian Pulp And Paper Industry (Pains and Pit Falls of Globalisation) | Bantbia K. M. | 1998 | IPPTA Convention Issue |
| Challenges And Opportunities Before Paper Industry | Murthy N.V.S.R., Suri P.K. | 1998 | IPPTA Convention Issue |
| Cellulosic Raw Materials Scenario In Future- Availability, Constraints, Cost and Plantations | Rao S. N. | 1998 | IPPTA Convention Issue |
| Wood and Non-Wood Fiberlines - a Modern Approach | Bokstrom M. , Germgard u. | 1998 | IPPTA Convention Issue |
| Emerging Scenario in Indian Paper Industry: Responding to the Challenges of Globalisation | Mall I.D. | 1998 | IPPTA Convention Issue |
| Industrial Project Management: Methods, Issues And Strategies | Arivalagan A. | 1998 | IPPTA Vol. 10, No. 2 |
| An Experience With Pandia Continuous Digester on Agricultural Residues | Darwesh B.R., Sharma Mahendra and Khan P.A | 1998 | IPPTA Vol. 10, No. 3 |
| Current Status Of Indian Paper Industry And Outlook For Investment in Near Future | Rao A.R.K., Bhattacharya J.P., & Banerjee Sangata | 1998 | IPPTA Vol. 10, No. 4 |
| Aracruz Cellulose And Sustainable Pulp Production in Brazil | Carlos Alberto Roxo and Luiz Fernando Brandao | 1998 | IPPTA Vol. 10, No. 4 |
| New Techniques in Engineering Evaluations for Improved Capital Effectiveness | Panchapakesan Bala | 1998 | IPPTA Vol. 10, No. 4 |
| Steam Explosion Pulping of Aspen Pretreated with Alcohol Mixed with A Non-Sulfuric Chemical | Aziz Ahmed, Bohuslav B. Kokta and Felix Carrasco | 1995 | IPPTA , Vol. 7, No. 3 |
| Studies on Alkaline Sulphite and Alkaline Sulphite-Anthraquinone Delignification of Ipomea Carnea Jacq. | Dutt Dharm, Suhail Akhtar Rao & Upadhyaya J.S. and Tiwary K.N. & Upadbyaya M.K. | 1995 | IPPTA , Vol. 7, No. 3 |
| An Experience with Jute Caddies Pulping For quality papers | Darwesh H. R, Sharma Mahendra | 1994 | IPPTA, Convention Issue |
| AS-A Q Pulping for Bagasse | Gnanasekaran A., Prasad D.Y., Mohan Rao N.R., | 1994 | IPPTA, Convention Issue |
| Studies on Alkoxygen and Alkoxygen-Anthraquinone Delignification of Cannabis sativa | Dutt Dharm and Upadhyaya J S | 1994 | IPPTA, Convention Issue |
| Studies on alkali-peroxide delignification of Cannabis sativa-A non sulphur process | Dutt Dbarm and Upadhyaya J. S. Upadbyaya M. K. and Tiwary K. N. | 1994 | IPPTA, Convention Issue |
| The Kinetics of Delignification in Low Sulphidity Kraft-Anthraquinone and Soda-Anthraquinone , Pulping of Mull Bamboo (Melocanna Baccifera) | Bhowmick Kshudiram, Akhtaruzzaman A.F.M. and Jabbar Mian A. | 1994 | IPPTA , Vol. 6, No. 2 |
| Vessel picking of printing papers-a problem in need of greater attention | GOPICHAND K., AND MAHESHWARI SUBHASH | 1990 | IPPTA, Vol. 2, No. 1 |
| Biomechanical pulping - the concept and status | GOPICHAND K. AND MAHESHWARI SUBHASH | 1990 | IPPTA, Vol. 2, No. 1 |
| Kinetic Studies on -Delignification of N.S.S.C. Pulping of Adhatoda Vasica | Upadhyaya J. S., Singh S.P. & Kumar Atul | 1988 | IPPTA, Vol. 25, No. 1 |
| Pulping of Agricultural Residues-Effect of 'Kappa Number' on Economics of Pulping and Bleaching of Rice Straw | Hari Kishore, A.G. Kulkarni, Brijesh Kumar and R. Pant | 1988 | IPPTA, Vol. 25, No. 2 |
| A Quick Method of Estimating Batch Digester Charge | SINGH S.P. & RAO N. J | 1988 | IPPTA, Vol. 25, No. 3 |
| Laboratory Studies on Urea as an Additive in Pulping for Pollution Abatement | SHARMA G.D. AND SINGH MAN MOHAN | 1988 | IPPTA, Vol. 25, No. 4 |
| Krart Odour-Causes and Control | VENKOBA RAO G. | 1987 | IPPTA, Vol. 24, No. 3 |
| Commercial Utilization of Cold Blow and Extended Delignification Techniques in Batch Cooking | BRIAN ORGILL | 1986 | IPPTA Convention Issue |
| Avenues For Increasing Productivity In Chemical Plant Of A Large Integrated Pulp & Paper Mill | MAHESHWARI M.P., SATYANARAYANA A., VENKOBA RAO G., SRINIVASA RAO P. | 1986 | IPPTA Convention Issue |
| Increased Understanding of Bagasse Pulping for Improved Chemical Recovery Efficiency and Better Environment | Kulkarni A.G., Mathur R.M., Naithani S. and Pant Rajesh | 1986 | IPPTA, Vol. 23, No. 4 |
| H-Factor Concept and its Relationship with Delignification Rate | Y.V.Chaudhary, K.C.Mittal | 1982 | IPPTA, Vol. 19, No. 3 |
| Improved Pulping of Mixed Hardwoods from Central India | A.R.K.Rao, R.Pant, N.R.Mohan Rao, Y.K.Sharma, A.J.Watson, A.G.Kulkarni, J.Fellegi | 1979 | IPPTA, Vol. 16, No.4 |
| Role of Additives in Papermaking | S.G.Mokhasi, J.D.Fernandes | 1979 | IPPTA, Vol. 16, No.4 |
| Improved Pulping of Mixed Hardwoods from Central India | A.R.K.Rao, R.Pant, N.R.Mohan Rao, Y.K.Sharma, A.J.Watson, A.G.Kulkarni, J.Fellegi | 1979 | IPPTA, Vol. 16, No.4 |
| Role of Additives in Papermaking | S.G.Mokhasi, J.D.Fernandes | 1979 | IPPTA, Vol. 16, No.4 |
| H Factor Concept for Scheduling Pulping Process and Its Correlationship with Delignification Rate | S.C.Kansal, S. Basu | 1977 | IPPTA Souvenir |
| HIgher Yields With Polysulfide Pulping | A.R.K. Rao, R.Varadan, N.R.Mohan Rao, N.V.S.R. Murthy | 1977 | IPPTA Souvenir |
| Kinetics of Delignification in NSSC Pulping of Eucalyptus Spp. and Validity of H-Factor | S. V. SINGH, RAJESH PANT, S.R. D.GUHA | 1977 | IPPTA Vol. 14, No.2 |
| Rapid Continuous Pulping of Bamboo And Hard Wood | V. Kannan, M.Jagannathan, S. Arunachalam, P.M. Trikkaoad, S.G. Rangan, N. Ravindranathan | 1976 | IPPTA, Vol. 13, No. 4 |
| Upgrading of Cellulose Pulps II-Removal of Lignin | M.K. Trivedi, S.C. Kansal | 1975 | IPPTA, Vol. 12, No. 1 |
| Some Up-To-Date Information On The Use Of Kamyr Equipment | Knut Dahl | 1972 | IPPTA, Vol. 9, International Seminar |
| BAUER M & D Digesters | E. F. Fuentes | 1972 | IPPTA, Vol. 9, International Seminar |
| PULPING PROCESSES-PRESENT STATUS AND TREND | D.C. Tapadar | 1972 | IPPTA, Vol. 9, No.2 |
| Pulping and Papermaking Properties of Fertilized Wood | B. LONNBERG | 1972 | IPPTA, Vol. 9, No.3 |
| Instrumentation In Pandia Continuous Digester at SPB | B. G. SUNDAR, S. G. RANGAN, N. RAVINDRANATHAN | 1971 | IPPTA, Vol. 8, No.2 |
| Pulping of Bagasse | MASAYA MATOBA | 1971 | IPPTA, Vol. 8, No.2 |
| High Yield Pulping Especially of Hardwoods | LENNART G. STOCKMAN | 1970 | IPPTA, Vol. 7 No. 1 |
| Some Recent Trends In the German and European Pulping Industry | JOSEF SCHURZ | 1970 | IPPTA, Vol. 7 No. 1 |
| High Yield Pulping of Tropical Raw Materials | G. F. UNDERhay | 1970 | IPPTA, Vol. 7 No. 1 |
| High Yield Pulping of Mixture of Maharashtra Hardwoods | S. R. D. GUHA, MAN MOHAN SINGH, and S. P. GROVER | 1970 | IPPTA, Vol. 7 No. 2 |
| High Yield Pulps | ILPO PALENIUS | 1970 | IPPTA, Vol. 7 No. 2 |
| Continuous Digester Instrumentation | A. K. DAS | 1970 | IPPTA, Vol. 7 No. 3 |
| Favourable Influence of Anthraquinone Pulping on the Physico-Chemical Charateristics of Bagasse and Hardwood Black Liquors | V. Raghunath, P.N. Rao, A.R.K. Rao, N. Gopalaratnam | 1992 | IPPTA, Vol. 4, No. 3 |
| Studies on Alkaline Sulphite-Anthraquinone Pulping of Bagasse | J.S. Upadhyaya, Ranveer Singh, Kamal Kumar, Praveen Gupta, Vipul Kumar, Dharam Dutt | 1992 | IPPTA, Vol. 4, No. 12 |
| Effect of Anthraquinone in Soda Pulping of Muli Bamboo (Melocanna Baccifera) | K. Bhowmick, A.F.M. Aktaruzzaman, A. Jabbar Mian | 1992 | IPPTA, Vol. 4, No. 18 |
| Hydrapulper Optimization by Two Dimensional Sequential Search | D.K. Singhal | 1992 | IPPTA, Vol. 4, No. 21 |
| Black spruce pulping : A comparison of explosion and conventional chemi-mechanical pulping processes | B.V. Kokta And Z. Deming | 1991 | IPPTA, Vol. 3, No. 2 |
| Comparative studies on soda-anthraquinone pulping for rice straw and Indian mixed hardwoods | Bhattacharya P.K., Ramakrishnan A. And Haldar R . | 1991 | IPPTA, Vol. 3, No. 2 |
| Influence of active alkali on the kinetics of kraft pulping of muli bamboo (Melocanna baccifera) | Mohammed Alam Shah, Nimai Chandra Goswami, A.F M. Akhtaruzzaman | 1991 | IPPTA, Vol. 3, No. 2 |
| Effect of anthraquinone in low sulphidity kraft pulping of muli bamboo (Melocamla Baccifera) | Bhowmick Kshudiram, A. Jabbar Mian, A.F.M. Akhtaruzzman | 1991 | IPPTA, Vol. 3, No. 4 |
| Economy in pulping anthraquinone | P. Math | 1991 | IPPTA, Vol. 3, No. 4 |
| Newsprint Grade pulps from whole mesta plant of Sabdariffa Hibiscus variety Part II pilot plant studies on high yield pulp production | A.G. Kulkarni, R.M. Mathur, S. Naithani, G.C. Agarwal, R. Pant | 1985 | IPPTA, Vol.22, No. 2 |
| Kraft Anthraquinone Pulping of Bamboo + Mixed hard woods (70:30), Bamboo (100%) and Mixed Hard Woods (100%) | Rajesh Rawat, G.D. Sharma, G.G. Bhargava, Man Mohan Singh | 1985 | IPPTA, Vol.22, No. 3 |
| Development of Chip Destructring Unit - Prospects & Problems | Islam, Sahidul | 1985 | IPPTA, Vol.22, No. 6 |
| High yield alkaline sulphite-anthraquinone pulping of bamboo | M.B. Jauhari, P.C. Ghosh | 1984 | IPPTA, Vol.21, No. 1 |
| Modified Pulping Process For Newsprint Grade Pulps From Bagasse | Y.K.Sharma, P.P.Bhola, S.P.Singh | 1983 | IPPTA, Vol.20, No. 1 |
| Effects of location and storage of reeds (Phragmites communis) on its pulping characteristics | T.B. Kashmoula, S.A. Tahir, T.M. Singh | 1983 | IPPTA, Vol.20, No. 2 |
| Preliminary Studies on the preparation of refiner-mechanical pulp, simulated thermo-mechanical pulp and cold soda pulp from boswellia serrata (salai chips) | R.P. Dwivedi, G.G. Bhargava, S.S. Kaul, Manmohan Singh | 1983 | IPPTA, Vol.20, No. 2 |
| Some basic aspects of high yield pulping | Subhash Maheshwari, Y. Srinivasa Rao, A.Y. Kulkarni | 1983 | IPPTA, Vol.20, No. 2 |
| Development in high yield pulping process | L.N. Chowdhary, U.L. Saksena, Subhash Chandra, Bahadur Singh | 1983 | IPPTA, Vol.20, No. 3 |
| A study on replacement of sodium sulphate by AQ-Large scale trial at Rohtas | K.P. Sinha, G.C. Pande, A.P. Seth | 1983 | IPPTA, Vol.20, No. 3 |
